How to install a new gotv decoder

Installing a new GOTV decoder is a relatively straightforward process. Here's a step-by-step guide to help you through it:

Before You Start

  1. Ensure you have a valid GOTV subscription and a compatible decoder.
  2. Check the GOTV website for any specific installation requirements or restrictions in your area.
  3. Make sure you have a power source and a TV with an HDMI port.

Step 1: Unpack the Decoder

  1. Carefully unpack the GOTV decoder from its box and remove any protective covers or packaging materials.
  2. Check the decoder for any damage or defects. If you notice any damage, contact GOTV customer support immediately.

Step 2: Connect the Decoder to Power

  1. Locate the power cord and plug it into a nearby power outlet.
  2. Make sure the power cord is securely connected to both the decoder and the outlet.

Step 3: Connect the Decoder to Your TV

  1. Locate the HDMI port on your TV and connect the decoder's HDMI output to it.
  2. Make sure the HDMI cable is securely connected to both the decoder and the TV.

Step 4: Connect the Decoder to Your Satellite Dish

  1. Locate the satellite dish and the LNB (Low Noise Block) connector.
  2. Connect the decoder's satellite input to the LNB connector using a coaxial cable.
  3. Make sure the coaxial cable is securely connected to both the decoder and the satellite dish.

Step 5: Configure the Decoder

  1. Turn on the decoder and wait for it to boot up.
  2. Use the remote control to navigate to the decoder's settings menu.
  3. Set the language, time zone, and other preferences as desired.
  4. Configure the decoder to use your GOTV subscription by entering your subscription details.

Step 6: Scan for Channels

  1. Use the remote control to navigate to the channel scan menu.
  2. Select the "Scan for Channels" option and wait for the decoder to scan for available channels.
  3. Once the scan is complete, you should see a list of available channels.

Step 7: Enjoy Your GOTV Channels

  1. Use the remote control to navigate to the channel list and select a channel to watch.
  2. Enjoy your GOTV channels and programming!

Troubleshooting Tips

  1. If you encounter any issues during installation, refer to the GOTV user manual or contact GOTV customer support for assistance.
  2. Ensure that all connections are secure and not loose.
  3. Check the decoder's power cord and satellite dish connections for any damage or defects.

By following these steps, you should be able to successfully install your new GOTV decoder and enjoy your favorite channels and programming.