Connect pc to a new ip

To connect your PC to a new IP address, you'll need to follow these steps:

Method 1: Using the Command Prompt (Windows)

1. Open the Command Prompt as an administrator:
   • Press the Windows key + X and select "Command Prompt (Admin)".
   • Alternatively, right-click on the Start button and select "Command Prompt (Admin)".
2. Type the following command and press Enter:

   netsh interface ip set address "Ethernet" static <new_ip_address> <subnet_mask> <default_gateway>

   Replace:

• "Ethernet" with the name of your network interface (e.g., "Wi-Fi" or "Ethernet").
• <new_ip_address> with the new IP address you want to assign (e.g., 192.168.1.100).
• <subnet_mask> with the subnet mask (e.g., 255.255.255.0).
• <default_gateway> with the default gateway IP address (e.g., 192.168.1.1).

For example:

netsh interface ip set address "Ethernet" static 192.168.1.100 255.255.255.0 192.168.1.1

Method 2: Using the Network and Sharing Center (Windows)

1. Open the Network and Sharing Center:
   • Click on the Start button and select "Control Panel".
   • Click on "Network and Internet" and then "Network and Sharing Center".
2. Click on "Change adapter settings" on the left side of the window.
3. Right-click on the network interface you want to configure (e.g., "Ethernet" or "Wi-Fi") and select "Properties".
4. In the Properties window, select "Internet Protocol Version 4 (TCP/IPv4)" or "Internet Protocol Version 6 (TCP/IPv6)" and click the "Properties" button.
5. In the Internet Protocol Properties window, select "Use the following IP address" and enter the new IP address, subnet mask, and default gateway.
6. Click "OK" to save the changes.

Method 3: Using the Network Settings (Mac)

1. Click on the Apple menu and select "System Preferences".
2. Click on "Network".
3. Select the network interface you want to configure (e.g., "Ethernet" or "Wi-Fi") from the left side of the window.
4. Click on the "Advanced" button.
5. In the Advanced window, select the "TCP/IP" tab.
6. Select "Manually" and enter the new IP address, subnet mask, and default gateway.
7. Click "OK" to save the changes.

Remember to replace the placeholders with the actual values for your new IP address, subnet mask, and default gateway.