Codes to activate brand new sharp copier

A brand new Sharp copier! Here are the common codes to activate and set up your new Sharp copier:

Default Settings:

  1. Factory Reset: To reset the copier to its default settings, press and hold the "Menu" button for 5 seconds. Release the button and press "OK" to confirm.
  2. Language: Set the language to English (or your preferred language) by navigating to "Menu" > "Setup" > "Language" > "English" (or your preferred language).
  3. Time Zone: Set the time zone to your location by navigating to "Menu" > "Setup" > "Time Zone" > select your time zone.

Security Settings:

  1. Admin Password: Set the admin password by navigating to "Menu" > "Setup" > "Security" > "Admin Password" > enter a password of your choice.
  2. User Password: Set the user password by navigating to "Menu" > "Setup" > "Security" > "User Password" > enter a password of your choice.

Network Settings:

  1. Network Settings: Connect to your network by navigating to "Menu" > "Setup" > "Network" > "TCP/IP" > select your network type (e.g., Wi-Fi or Ethernet).
  2. IP Address: Set the IP address by navigating to "Menu" > "Setup" > "Network" > "TCP/IP" > "IP Address" > enter the IP address of your choice.

Other Settings:

  1. Date and Time: Set the date and time by navigating to "Menu" > "Setup" > "Date and Time" > enter the date and time of your choice.
  2. Paper Size: Set the paper size by navigating to "Menu" > "Setup" > "Paper Size" > select your paper size (e.g., A4, Letter, etc.).
  3. Toner Save: Enable toner save by navigating to "Menu" > "Setup" > "Toner Save" > select "On" to conserve toner.

Additional Tips:

  1. Read the User Manual: Familiarize yourself with the user manual to understand the copier's features and settings.
  2. Contact Sharp Support: If you encounter any issues or have questions, contact Sharp's customer support for assistance.
  3. Regular Maintenance: Regularly clean and maintain your copier to ensure optimal performance and extend its lifespan.

Remember to always refer to your copier's user manual for specific instructions, as the exact steps may vary depending on your model and firmware version.