Assembling brand new brother se400

Congratulations on your new Brother SE400 sewing machine! Assembling a brand new machine can be a bit overwhelming, but don't worry, I'm here to guide you through the process.

Before You Start

1. Make sure you have all the parts and accessories included in the box. Check the instruction manual for a parts list.
2. Read the instruction manual carefully before starting the assembly process.
3. Choose a flat, stable, and clean surface to work on.

Step-by-Step Assembly

Step 1: Unpacking and Preparation

1. Carefully remove the machine from the box and all the accessories.
2. Remove the protective coverings from the machine and accessories.
3. Place the machine on the chosen surface.

Step 2: Installing the Bobbin Winder

1. Locate the bobbin winder on the top of the machine.
2. Remove the protective covering from the bobbin winder.
3. Insert the bobbin into the winder and turn it clockwise until it stops.
4. Remove the bobbin and repeat the process to ensure it's properly seated.

Step 3: Installing the Presser Feet

1. Locate the presser feet on the machine.
2. Remove the protective covering from the presser feet.
3. Place the presser feet onto the machine, making sure they're securely seated.
4. Tighten the presser foot screws by turning them clockwise.

Step 4: Installing the Take-Up Lever

1. Locate the take-up lever on the machine.
2. Remove the protective covering from the take-up lever.
3. Place the take-up lever onto the machine, making sure it's securely seated.
4. Tighten the take-up lever screw by turning it clockwise.

Step 5: Installing the Free Arm

1. Locate the free arm on the machine.
2. Remove the protective covering from the free arm.
3. Place the free arm onto the machine, making sure it's securely seated.
4. Tighten the free arm screw by turning it clockwise.

Step 6: Installing the Extension Table

1. Locate the extension table on the machine.
2. Remove the protective covering from the extension table.
3. Place the extension table onto the machine, making sure it's securely seated.
4. Tighten the extension table screw by turning it clockwise.

Step 7: Final Check

1. Check all the parts and accessories to ensure they're properly installed and securely seated.
2. Make sure the machine is level and stable.
3. Plug in the machine and turn it on to test it.

Tips and Reminders

• Always refer to the instruction manual for specific assembly instructions, as they may vary depending on your machine model.
• Make sure to handle the machine and accessories with care to avoid damage or injury.
• If you're unsure about any part of the assembly process, consider consulting a professional or contacting Brother's customer support.

Congratulations! You have successfully assembled your brand new Brother SE400 sewing machine. Now, it's time to start sewing and exploring the many features and capabilities of your new machine. Happy sewing!